Leveling Element

Product Details:

Stainless steel leveling feet GN 20 without mounting holes are certified according to 3-A Sanitary Standards, Inc. and DGUV Test guidelines and are intended for use in hygienic areas. Stainless steel leveling feet GN 20 with mounting holes are certified according to EHEDG, 3-A Sanitary Standards, Inc. and DGUV Test guidelines and are therefore ideal for use in hygienic areas.

 

The bottom seal (Type A) protects the area beneath the foot plate from dirt. For this, the foot must be pressed down by the weight of the machine. The bottom seal (Type B) protects the area beneath the foot plate from dirt. For this, the foot must be screwed on using the fixing holes and compressed accordingly. Hygienic fastenings, e.g. GN 1580 screws and nuts, and the correct position of the mounting holes are essential. The sealing ring above the adjustment sleeve enables fastening without dead space. Due to the wiper or the ball seal, the moving components are sealed against the environment.

The high quality finish prevents adherence of dirt and facilitates cleaning.

 

The values listed in the table for static load capacity refer to a purely vertical load in relation to the leveling foot. Under normal operating conditions bending loads or angular loads are not uncommon and result in a reduction of load capacity, which must be taken into consideration.

Product Details:

Leveling feet AMT 31 with vulcanised rubber (Type B3, B4, C3 and C4) and screw version W feature fewer dead spots owing to their construction method and are also easier to clean.

 

 

Leveling feet GN 31 will be delivered mounted and are not removable.

Product Details:

A wide range of levelling elements for assembly on machinery, machine guards and equipment: levelling feet and adjustable levelling feet, supports and guides, conveyor components, bearing end caps. The range features technopolymer and metal bases, also for ground mounting, with or without no-slip disk and in different shapes and diameters. Stems are available in zinc-plated steel. 

Product Details:

We sell MS/S.S 304 Leveling Foot pad Size Bsae 80/100/120   stud Size M16,M20,M24 

Additional Information:

• Item Code: AEMT
• Production Capacity: 100
• Delivery Time: EX STOCK
• Packaging Details: PLASTIC BAG

Product Details:

We sell leveling foot pad in youse Industrial machine frame. and steel base frame structure.       

Product Details:

Base

Zinc-plated steel.

Damping element

NR rubber, hardness 80 Shore A, black colour, matte finish.

Levelling plate

Zinc-plated steel.

Packing ring

NBR synthetic rubber O-Ring.

Threaded stem

Zinc-plated steel, supplied not assembled.

Nut and washer

Zinc-plated steel.

Product Details:

• Base

   

  Polyamide based (PA) technopolymer with adjusting hexagon, black colour, matte finish.

   

  Standard executions
  • LX-SST: AISI 304 stainless steel threaded stem.
  • LX-SST-S: AISI 304 stainless steel threaded stem, base with screwdriver slot.
  • LX-AS-SST: AISI 304 stainless steel threaded stem, base with SBR rubber no-slip disk, supplied assembled to the base.

Additional Information:

• Production Capacity: 100
• Delivery Time: 10 TO 12 DAYS

Product Details:

Type (Base plate)

 

Type A1: Steel, zinc plated, rubber inlaid, black

 

 

Type A5: Steel, plastic coated black, rubber inlaid, black

 

Version

• Version S: Without nut, external hex at the bottom

• Version SK: With nut, external hex at the bottom

• Version U: Without nut, hex socket at the top and wrench flat at the bottom

• Version UK: With nut, hex socket at the top and wrench flat at the bottom

• Version X: External hex with internal thread

Base plate, steel sheet metal

• Type A1:

Steel, zinc plated, blue passivated

• Type A5:

Steel, powder coated

Black, RAL 9005

 

Flange, sheet metal

 

 

Steel, zinc plated, blue passivated

 

 

Threaded stem

 

 

Steel, zinc plated, blue passivated

Product Details:

Material

Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.

Bases without no-slip disk

• LS.A (D = 25 - 32 - 40 - 50 -60 mm): base without ground mounting.

• LV.A (D = 60 - 70 - 80 - 100 - 125 mm): base without ground mounting.

• LV.F ( D = 80 - 100 - 125 mm): base with two holes at 180° for ground mounting, supplied covered by a diaphragm (which can be easily removed by a metal tool) to avoid all unhealthy deposits of dirt and dust when only one hole is used (see Fig.1).

• LV.FO ( D = 60 - 80 mm): base with two holes for ground mounting, supplied covered by a diaphragm (which can be easily removed by a metal tool) to avoid all unhealthy deposits of dirt and dust when only one hole is used (see Fig.1).

Bases with no-slip disk assembled

 

NBR rubber no-slip disk, hardness 70 Shore A.

 

 

The particular assembling system of the no-slip disk to the base assures a perfect anchoring, preventing separation even in case of impact during transport or of adhesion (sticking) to the floor (see No-slip disks).

 

• LS.A-AS (D = 25 - 32 - 40 - 50 - 60 mm): base without ground mounting.

• LV.A-AS (D = 60 - 70 - 80 - 100 - 125 mm): base without ground mounting.

• LV.F-AS (D = 80 - 100 - 125 mm): base with two holes at 180° for ground mounting, supplied covered by a diaphragm (which can be easily removed by a metal tool) to avoid all unhealthy deposits of dirt and dust when one only hole is used (see Fig.1).

• LV.FO-AS (D = 60 - 80 mm): base with two holes for ground mounting, supplied covered by a diaphragm (which can be easily removed by a metal tool) to avoid all unhealthy deposits of dirt and dust when only one hole is used (see Fig.1).

Product Details:

Base

 

Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.

 

Through stem

 

Threaded zinc-plated steel with regulation hexagon, black-oxide steel retaining ring and zinc-plated steel plain washer.

 

Standard executions

• LV.A-APS: without no-slip disk.
• LV.A-APS-AS: with NBR rubber no-slip disk, hardness 90 Shore A, supplied assembled, reinforced with zinc-plated steel plate, fixed by means of two screws.

Product Details:

Types (Base plate)

• Type B1: Matte shot-blasted, rubber, inlaid, black

• Type B2: Matte shot-blasted, rubber inlaid, white

• Type B3: Matte shot-blasted, rubber vulcanised, black

• Type B4: Matte shot-blasted, rubber vulcanised, white

• Type C3: Polished, rubber vulcanised, black

• Type C4: Polished, rubber vulcanised, white

Version

• Version S: Without nut, external hex at the bottom

• Version SK: With nut, external hex at the bottom

• Version T: Without nut, wrench flat at the bottom

• Version TK: With nut, wrench flat at the bottom

• Version U: Without nut, hex socket at the top and wrench flat at the bottom

• Version UK: With nut, hex socket at the top and wrench flat at the bottom

• Version V: Without nut, external hex at the top and wrench flat at the bottom

• Version VK: With nut, external hex at the top and wrench flat at the bottom

• Version W: With adjustable sleeve, covered thread, wrench flat at the bottom

• Version X: External hex with internal thread

 

Base plate

 

 

Stainless steel AISI 304

 

 

Threaded stem

 

 

Stainless steel AISI 303

 

 

Hex nut ISO 4032

 

 

Stainless steel AISI 304

 

 

Rubber pad, inlaid

 

• Black: NBR (Perbunan®)

80±5 Shore A

• White: TPE (Santoprene®)

80±5 Shore A

 

Rubber pad, vulcanised

 

 

80±5 Shore A

 

• Black: NBR (Perbunan®)

• White: NBR (Perbunan®)

Product Details:

 We sell  Leveling feet GN 17 are suitable for use in aggressive environments.

 

The inclined surfaces for liquid runoff and the high surface quality of the base plate simplify cleaning and prevent the accumulation of dust or dirt. The FDA-compliant and vulcanized rubber underlay seals the base against the resting surface and allows the feet to be used in food-processing areas or the pharmaceutical industry, for example.

 

The leveling feet are supplied assembled and cannot be disassembled.

Product Details:

We Sell Vibration-damping levelling feet echnopolymer base, steel stem, PUR Polyurethane-based rubber  natural colour, in Ahmedabad

Product Details:

Base

 

Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.

 

Articulated stem

 

Threaded AISI 304 stainless steel with adjusting square.

 

Standard executions

• LSQ.A-SST: without no-slip disk.
• LSQ.A-AS-SST: with NBR rubber no-slip disk, hardness 70 Shore A, supplied assembled to the base.

Product Details:

Type (Base)

• Type E0: Without rubber pad, with one slotted hole

• Type E3: With rubber pad, vulcanized, black, with one slotted hole

• Type G0: Without rubber pad, with 2 slotted holes

• Type G3: With rubber pad, vulcanized, black, with 2 slotted holes

Version (Screw)

• Version S: Without nut, external hex at the bottom

• Version SK: With nut, external hex at the bottom

• Version U: Without nut, hex socket at the top and wrench flat at the bottom

• Version UK: With nut, hex socket at the top and wrench flat at the bottom

• Version X: External hex with internal thread

 

Base plate

 

 

Steel

 

 

Zinc plated, blue passivated

 

 

Threaded stem

 

 

Steel

 

 

Zinc plated, blue passivated

 

 

Hex nut ISO 4032

 

 

Steel

 

 

Zinc plated, blue passivated

 

 

Rubber pad

 

• Vulcanized

• Black, NBR (Perbunan^®)

70±5 Shore A

Product Details:

Type (Foot plate)

• Type D0: Fine turned, without rubber underlay

• Type D1: Fine turned, with rubber underlay, inlaid, black

Version of the screw

• Version S: Without nut, external hex at the bottom

• Version SK: With nut, external hex at the bottom

• Version T: Without nut, wrench flat at the bottom

• Version TK: With nut, wrench flat at the bottom

• Version U: Without nut, hex socket at the top and wrench flat at the bottom

• Version UK: With nut, hex socket at the top and wrench flat at the bottom

• Version V : Without nut, external hex at the top and wrench flat at the bottom

• Version VK: With nut, external hex at the top and wrench flat at the bottom

• Version W: With adjustable sleeve, covered thread and wrench flat at the bottom

• Version X: External hex with internal thread

 

Base plate

 

 

Stainless Steel AISI 304

 

 

Threaded stem

 

 

Stainless Steel AISI 303

 

 

Hexagon nut ISO 4032

 

 

Stainless Steel AISI 304

 

 

Rubber underlay, inlaid

 

 

NBR (Perbunan^®), 70 Shore A

Product Details:

Type (Base plate)

• Type B1: Matte shot-blasted, rubber inlaid, black

Version (Screw)

• Version S: Without nut, external hex at the bottom

• Version SK: With nut, external hex at the bottom

• Version T: Without nut, wrench flat at the bottom

• Version TK: With nut, wrench flat at the bottom

• Version U: Without nut, hex socket at the top and wrench flat at the bottom

• Version UK: With nut, hex socket at the top and wrench flat at the bottom

• Version V: Without nut, external hex at the top and wrench flat at the bottom

• Version VK: With nut, external hex at the top and wrench flat at the bottom

• Version W: With adjustable sleeve, covered thread and wrench flat at the bottom

• Version X: External hex with internal thread

 

Base plate / flange

 

 

Stainless steel AISI 304

 

 

Threaded stem

 

 

Stainless steel AISI 303

 

 

Hex nut ISO 4032

 

 

Stainless steel AISI 304

 

 

Rubber pad, inlaid

 

 

Black, NBR (Perbunan®)

 

 

80±5 Shore A

Additional Information:

• Delivery Time: 7 DAYS

Product Details:

Types (Base plate)

• Type A0: Without rubber pad

• Type B0: Without rubber pad, with 2 mounting holes

• Type A1: With rubber pad, clipped on, black

• Type A3: With rubber pad, vulcanized, black

Version (Screw)

• Version S: Without nut, external hex at the bottom

• Version SK: With nut, external hex at the bottom

• Version U: Without nut, hex socket at the top and wrench flat at the bottom

• Version UK: With nut, hex socket at the top and wrench flat at the bottom

• Version X: External hex with internal thread

 

Base plate

 

 

Steel, zinc plated, blue passivated

 

 

Threaded stem

 

 

Steel, zinc plated, blue passivated

 

 

Hex nut ISO 4032

 

 

Steel, zinc plated, blue passivated

 

 

Rubber pad

 

 

Clipped on

 

 

Black, TPE (Santoprene^®)

 

 

≈ 80 Shore A

 

 

Rubber pad

 

 

Vulcanized

 

 

Black, NBR (Perbunan^®)

 

 

70 ± 5 Shore A

Product Details:

We sell Stainless Steel material grade 304 Leveling Foot pad in youse pharma and food process machines in haygeinic frame base .  

Additional Information:

• Production Capacity: 100
• Delivery Time: ex stock

Product Details:

Type

• Type SV: with damping element

Steel

• Tensile strength class 5.8

• zinc plated, blue passivated

Damping element

Elastomer (PUR)

• Sylomer SR 450-12

• anti-slip, glued

• grey

• oil resistant

• Operating range form -30 °C up to 70 °C

Hexagon nut ISO 4032

Steel zinc plated, blue passivated

Product Details:

Machine levelling elements are components used to ensure that machines and equipment are properly aligned and stable on the surfaces they are installed on. These elements help to adjust the height and level of machinery, ensuring accurate performance, reducing vibrations, and preventing operational errors or damage. Typically used in industrial and manufacturing settings, machine levelling elements can include levelling feet, wedges, or screw supports. They allow for precise adjustment to compensate for uneven floors or to position equipment at specific angles. Proper levelling is crucial for maintaining machine accuracy, extending equipment lifespan, and ensuring safety in the workplace.

Ask ChatGPT

Product Details:

Base

 

Polyamide based (PA) technopolymer with adjusting hexagon, black colour, matte finish.

 

Standard executions

• LX: zinc-plated steel threaded stem.
• LX-S: zinc-plated steel threaded stem, base with screwdriver slot.
• LX-AS: zinc-plated steel threaded stem, base with SBR rubber no-slip disk, supplied assembled to the base.

Additional Information:

• Production Capacity: 100
• Delivery Time: 10-12 DAYS

Product Details:

Levelling elements and machine feet used to align and install machines and equipment are available in different material combinations of base and stem.
 

Product Details:

We sell Leg Leveler pad in india in material grade Stainless Steel 304  Base size in 60mm , 80mm ,100mm or 120mm  stude size in M12 to M24  

Product Details:

Base

Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.

Ball joint

Glass-fibre reinforced polyamide based (PA) SUPER-technopolymer, black colour.

Standard executions

• LS.A+SJF: without no-slip disk.

• LS.A-AS+SJF: with NBR rubber no-slip disk, hardness 70 Shore A, supplied assembled to the base.

Product Details:

We sell Stainless Steel 304 Leveling Foot Pad in Base Dia 100 mm stud M20 Lenth 100 mm in Gujart Ahmedabad Area. 

Product Details:

We Sell Base Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.

 

Articulated stem

 

Threaded zinc-plated steel with adjusting hexagon.

 

Standard executions

• LSX.A: without no-slip disk.

• LSX.A-AS: with SBR rubber no-slip disk, assembled to the base.

Product Details:

Types (Foot plate)

• Type A: without rubber underlay

• Type B: with rubber underlay

• Type C: with O-ring

 

Foot plate

 

Steel, plastic coated

 

black, RAL 9005, textured finish

 

 

Threaded studs / Hexagon nut ISO 8675

 

 

Steel, zinc plated, blue passivated

 

 

Rubber underlay, inlaid

 

black, NBR

 

85±5 Shore A

 

 

O-ring, inlaid

 

black, NBR

 

≈ 70 Shore A