Product Details:
Material | Mild Steel |
Color | Red |
Brand | SPEEDY BLOCK |
Weight | 2066 |
Holding Capacity | 750 / 1050 /2000 /2400 / 2800 /4500 Kilonewtons |
Supplied With | NEOPRENE Rubber tip 85 Shore A |
Usage/Application | jig and fixture |
Finish | It's a finish that provides corrosion protection and good wear life |
Height | 303 |
Handle Moves | 90 DIGREE |
Clamping force | UP TO 4500 KN |
Model Number | FORM A |
Spindle Diameter | UP TO 25MM |
Material: Galvanized steel or AISI 304 stainless steel
Riveted pivots: Galvanized steel or AISI 304 stainless steel
Supporting bushes: Hardened and ground steel (for sizes _130)
Handles: Red polyurethane resistant to oils, grease and other chemical agents.
Performance:
Form A and form AX with open clamping lever and two flanged washers.
Form E and form EX with full clamping lever and bolt retainers to be welded in the desired position and angle.
Spindles: To be ordered separately
Product Details:
Material | Mild Steel |
Color | Red |
Brand | SPEEDY BLOCK |
Usage/Application | Jig and Fixture and for welding |
Corrosion Resistance | Yes |
Capacity | 40/90 /100/170 /180/320 KN |
Steel Grade | Galvanized steel or AISI 304 stainless |
Designed | low profile of the tool |
Riveted pivots: | Galvanized steel or AISI 304 stainless |
Material: Galvanized steel or AISI 304 stainless Steel
Riveted pivots: Galvanized steel or AISI 304 stainless steel
Supporting bushes: Hardened and ground steel (for sizes _ 355).
Handles: Red polyurethane resistant to oils, grease and other chemical agents.
Performance: Form M and form MX with open clamping lever and two flanged washers.
Form O and form OX with full clamping
Lever and bolt retainers to be welded in
The desired position and angle.
Spindles: To be ordered separately
Product Details:
Material | Nylon |
Brand | ELESA+GANTER |
Usage/Application | Industrial |
Features | glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish. Fitting by me |
Structure | mounting of a sensor on the machine or system. |
Design | sensor mounting bracket |
Product Details:
Material | Mild Steel |
Type of Clamp | Bore Clamps |
Usage/Application | Solid and stable clamping through either 3 or 6 contact points on the workpiece |
I Deal In | New Only |
Structure | Precise self centering |
Item Code | GN411.2 |
accuracy | Repetitive accuracy: +- 0.025 |
Steel
Clamping balls / segments
With centering bore clamps GN 411.2 workpieces can be centrally positioned and clamped from the inside of the bore.
They offer the following advantages:
- Precise self centering
- Repetitive accuracy: ± 0.025
- Accuracy of concentricity: ± 0.05
- Solid and stable clamping through either 3 or 6 contact points on the workpiece
- Clamping of workpieces with uneven or irregular surface (such as castings) with type K
- Distortion free clamping
- Reduced height
- Can be fitted in any position
- Large adjustable range
- Draw-down clamping